Blue Color FVMQ Fluorosilicone O Rings

Fluorosilicone O rings are recommended for general purpose service in aerospace and fuel applications, and provide good high, low temperature performance in sealing fuels and mineral oils. Fluorosilicone rubber is a widely used elastomer that can be compounded to meet a wide range of applications. The mechanical and physical properties are very similar to silicone rubber. However, fluorosilicone offers improved fuels and mineral oil resistance but poor hot air resistance when compared with silicone.

Model:KXT 1710FVMQ

Send Inquiry

Product Description

FVMQ Fluorosilicone O Rings

Fluorosilicone O rings are recommended for general purpose service in aerospace and fuel applications, and provide good high, low temperature

performance in sealing fuels and mineral oils. Fluorosilicone rubber is a widely used elastomer that can be compounded to meet a wide range of

applications. The mechanical and physical properties are very similar to silicone rubber. However, fluorosilicone offers improved fuels and mineral

oil resistance but poor hot air resistance when compared with silicone.

Advantages

• Improved fuel & mineral oil resistance than silicon

• Excellent resistance to aging & weather-sunlight

• Resistant to oxidizing chemicals, fules

• Resistant to animal & vegetable oils

• Good heat & ozone resistance

• Good chemical resistance

Application

• Petroleum oils & hydrocarbon fuels enviroment

• Jet fuel and dry heat enviroment

• High or low temperature usage

• Most chemical enviroment

• Chlorinated Solvent., etc

FVMQ Properties

Item	FVMQ	Test Method
Color	Blue
Specific gravity	1.45-1.5g/cm3	ASTM D297
Hardness	40°-80° Shore A	ASTM D2240
Tensile strength	4.5 MPa (min)	ASTM D412
Elongation at break	125% (min)	ASTM D412
Size	Varies
Compression set 170°C 22 hrs	Permanent set 10-30%(max)	ASTM D 395B
Low temperature resistance	-73 to -65	ASTM D1329
Temperature range	-65°C to +175°C	ASTM D2000